CAPACITY
A facility built only for sleeves
3 grooving machines
Three specialised grooving machines.
Dedicated team
Facilities dedicated to grooved coiling sleeves, with staff highly experienced in sleeve manufacture.
Material sourcing
Raw materials through well-structured partnerships with merchants.
Finishing support
Three compressors supporting fabrication and the delicate finishing work.
Handling & loading
A 10 t forklift and 2 × 10 t gantry hoists for manufacture and loading.
EET drawing S-4013-W5659-3 · Sleeve cross-over geometric detail
TECHNICAL
Groove geometry matched to your rope
Grooves are cut to an oversize of the nominal rope diameter, chosen for each rope. Example for a 28 mm nominal rope:
Oversize
Factor
Groove Ø (mm)
4.5%
× 1.045
29.26
5%
× 1.05
29.40
5.5%
× 1.055
29.54
6%
× 1.06
29.68
7%
× 1.07
29.96
FEATURED PROJECT
Replacement sleeves for a Ø5.5 m double-drum winder
Half sleeves designed for site assembly onto an existing Ø5.5 m × 1.83 m wide drum, positioned to match the sleeves already in service and trimmed on site for a precise fit.
Drum
Ø5500 × 1830 mm
Sleeve plate
40 mm S355JR+AR
Rope
51 mm nominal
End filler rod
Ø52, BS 970 070M20
Site assembly detail – two half sleeves fitted onto the drum after trimming
ENQUIRE
Planning a new sleeve set or a replacement?
Send us your drum and rope details. Our drawing office will prepare a design for your approval.
+27 11 609 2070 · sales@eet.co.za · 3A Mpande Road, Sebenza, Edenvale